Other

ST-R8070 Brake Hoodsby Shimano

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

Replacement small parts for Hope disc brake Hope disc brake calipers.

Everything you need for installing your integrated rear mounted kickstand.

Features
- Includes both M5 and M6 hardware
- See kickstand diagram for proper assembly

• Designed to keep dust and dirt out of V-Brake cable/housing systems

Park your bike with the genuine Fetch+ 2 kickstand hardware.

Features
- Includes M8 mounting bolt
- Powder coated finish for high durability

- Axle washers for use with 19mm bottom brackets - 19.1x26x2.0mm - Interface: 19mm - Sold in a 10-pack

KS Dropper Post Service Parts

Complete remotes and remote components for KS dropper posts.

KS Dropper Post Service Parts

- Aheadset preload adjusting bolt

Service parts for Fox suspension.

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

Hope Brake Lever Parts

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

1/2" X 1/8" -Pin Length: 9.2 mm

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with the Madone KVF Aero Integrated Bar/Stem - Add any XXX accessory mount (sold seperately) for an elegant, integrated look

Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with Bontrager XXX Blendr stem - Add any XXX accessory mount (sold seperately) for an elegant, integrated look

When it's time to refresh or upgrade your seatpost, Trek Genuine Replacement Parts have you covered.

Features
- Spacers that reduce travel for Bontrager DropLine 31.6mm dropper seatposts
- For riders who need a shorter seatpost or travel for their fit
- Spacers are not 'stackable' to create greater travel reductions
- Not forwards compatible with any generation of Line or Line Elite Dropper posts
- Refer to the Service Manual for assembly & service instructions

Get back on the trail with genuine replacement dropper post parts.

Features
- Not compatible with Line Elite 31.6mm post
- Regular maintenance of the Line Dropper will help maintain performance
- Tighten to 4nm

Original replacement hardware for your e-bike system.

Features
- Refer to the Service Manual for assembly & service instructions
- Hardware not included

Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.

Original fender hardware.

Features
- Sold as pairs
- Plastic washer with taper
- 12mm outside diameter

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Saddle clamp heads and lowers for KS Dropper posts.

KS Dropper Post Service Parts