Parts & Accessories

Handlebar computer mount for Garmin/Wahoo for Vuka Shift AXS

With this adaptor piece, you are able to easily convert any Garmin quarter turn bike computer mount to a Wahoo bike computer mount.

Our stem mount for Wahoo ELEMNT GPS bike computers is made of lightweight, durable plastic and is a great solution for cyclists who prefer to keep their computer on top of the stem. - Fits any stem - Weight: 0.2oz - Works with ELEMNT, ELEMNT ROAM, ELEMNT BOLT, and ELEMNT Mini Note: BOLT loses aerodynamic advantage with this mount)

Our integrated mount for the ELEMNT BOLT GPS bike computer is made of durable, lightweight plastic. It also comes with an optional locking screw that is UCI compliant for connecting your ELEMENT BOLT to your bike for weigh-ins. - Fits Canyon Endurance 2017 and newer models and other integrated handlebars with two underside mounted bolts between 0.70 inches (17.75mm) and 2.00 inches (50.88mm) - Weight: 0.6oz - Works exclusively with original ELEMNT BOLT

The Wahoo TRACKR SPEED sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy.

For proper assembly.

Features
- For use with Shimano Centerlock rotor
- Including M4 x 16mm bolt

Original replacement charge port for your Bosch Smart system

Features
- Compatible with Bosch Smart System
- Check the service part lists for bike compatibility
- Assembly hardware available separately

Mounts to the Knock Block frame chip display tabs on Rail Gen 2 to mount the Bosch Kiox display behind the stem to keep your cockpit spotless.

Features
- Not Bosch Smart System compatible
- Designed for Rail Gen 2 frames
- Refer to Service Manual for assembly instructions and service

Foam pads to help reduce movement of the battery inside a RIB cavity.

Features
- Compatible with all RIB equipped models
- Refer to Service Manual for assembly instructions and service

Original replacement battery holder for your Domane MKIV.

Features
- For use with Shimano internal Di2 battery
- For installing a Di2 battery in your bike's seat tube
- Integrates seamlessly with the frame

The right parts for the right bike.

Features
- Compatible with Carbon and Aluminum
- Refer to Service Manual for assembly instructions and service

Use a smaller battery in your 750Wh or 625Wh RIB battery slot.

Features
- For use with Bosch Smart System batteries only
- Used in 750Wh battery slots with 625Wh batteries
- Used in 625Wh battery slots with 500Wh batteries
- Not for use in 750Wh battery slots with 500Wh batteries
- Hardware is not included
- Refer to Service Manual for assembly instructions and service

Keep your bike operating as it should.

Features
- Diametrically magnetized to improve sensor reception
- For use with 6-hole disc rotor mounts
- Compatible with rear dropout sensors only

Original replacement battery cover for your Powerfly.

Features
- Refer to the Service Manual for assembly & service instructions
- Hardware sold separately

Specific for Bosch Smart Systems.

Features
- 970mm cable length
- Mounting hardware not included

The extension cord is an optional item for the SRAM AXS drivetrain, powering the derailleur from the e-system battery instead of a separate AXS battery.
Integrating into the derailleurs AXS battery port, the cord routs through the bicycle frame into the e-system drive unit.

Features
- Works with any AXS derailleur
- Powers derailleur by main e-system battery

Know what's coming. Ride with extra confidence with Trek CarBack Radar Rear Light. CarBack's radar helps detect rear-approaching vehicles from up to 240m and provides audio and visual alerts through paired GPS head units for increased on-bike awareness. Built with integrated best-in-class Daytime Running Lights that are visible from up to 2km away, CarBack is a must-have for every cyclist riding on shared roads. - CarBack can detect and alert riders of rear-approaching vehicles from up to 240m away - Compatible with most cycling GPS computers - Pair CarBack with the Trek Accessory app to see a vehicle's rear-approaching and passing distance on your smartphone - Designed with focus, flash, and range to be Daytime-visible from up to 2km away - Four light flash modes: Day Flash 90LM, Day Steady 25LM, Night Steady 5LM, and Night Flash 5 LM - Visible fuel gauge LEDs make it easy to see CarBack's 7+ hour battery status - IPX7 waterproof rating to confidently ride through wet conditions - Includes Quick Connect Plus rear mount and USB-C charging cable

Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz

• Fits head & derailleur tubes to mount accessories on a USS (under-seat steering) recumbent

Shimano Di2 Frame Junction Box

Frame Junction Box connects via SD50 E-tube wires to four different points: front derailleur, rear derailleur, cockpit junction box and battery mount

All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions

Use Di2 system checker to update component firmware from http://e-tubeproject.shimano.com/

Shimano EW-SD300 Di2 eTube Wire for external routing is available in a variety of lengths.

Compact design makes new electric components smaller and lighter

EP8 EP800 Series

Shimano Di2 Frame Junction Box Frame Junction Box connects via SD50 E-tube wires to four different points: front derailleur, rear derailleur, cockpit junction box and battery mount All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions Use Di2 system checker to update component firmware from http://e-tubeproject.shimano.com/

Shimano Di2 Frame Junction Box - Frame Junction Box connects via SD50 E-tube wires to four different points: front derailleur, rear derailleur, cockpit junction box and battery mount - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware from http://e-tubeproject.shimano.com/

Charger parts for Shimano STEPS.

Adapter for charging battery (BT-E8035) with charger (EC-E6000/E6002/E8004)

Shimano EC-DN100A Battery Charger - Includes Charging Cord. EC-EN100 is the compact new charger keeping your wireless Di2 battery charged up.

The Shimano EW-EC300 Charging Cable is compatible with new Shimano 12-speed road Di2 systems. This cable will also recharge the Dura-Ace R9200 and Ultegra R8100 power meter cranksets. 1700mm cable length

Shimano SM-PCE02 link cable for e-tube and Di2 systems.

Shimano Di2 Junction Box - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware from http://e-tubeproject.shimano.com/ - SM-EW90-A 3-Port Cockpit Junction Box connects 1 pair of Di2 shifters to the frame junction box via 3 SD50 E-tube wires - OEM front wiring kit for Dura-Ace Di2 9070 - LED battery charge level indicator - Rear Derailleur adjustment mode - Internal Battery charging port - Includes Junction Box Band (CY9082) and Junction Box Hook (Mounting Plate, CY9081)

Shimano Di2 External Battery Mounts - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware

- Di2 internal battery, fits all e-Tube Di2 groups - Capacity: 500 mAH (± 2000km) - Use with EW-WU101 or SC-MT800 interfaces/junction to gain BlueTooth Smart wireless connectivity for on-the-fly adjustments with smartphones and tablets - Requires SM-BCR2 charger